With arrows pointing toward the urine specimen, immerse the strip test vertically in the urine specimen for at least 5 seconds.
Do not allow the urine level to exceed the MAX when immersing the strip.
Note: The test strip and urine have to be at room temperature 59-86ºF (15-30°C) for testing. Remove the test device from the sealed pouch and use it as soon as possible.
Lay the strip down on a flat, non-absorbent, clean surface.
Start the timer and wait for the colored line(s) to appear.
Read results in five minutes.
Do not read results after more than 5 minutes.
1. Positive (LH Surge): If two color bands are visible, and the test band is equal to or darker than the control band, one will probably ovulate in the next 24-48 hours.
2. Negative (No LH Surge): Only one color band appears on the control region, or the test band appears but is lighter than the control band.
3. Invalid: No visible band at all, or there is a visible band only in the test region and not in the control region. Repeat with a new test kit.
1. Positive (pregnant): Distinct color bands appear in the Control and Test Zones. It indicates that you are pregnant.
2. Negative (not pregnant): Only one color band appears, in the Control Zone. No apparent band on the Test Zone. This indicates that no pregnancy has been detected.
3. Invalid: No visible band at all, or there is a visible band only in the test region and not in the control region. Repeat with a new test kit.
USD
EUR
GBP
CAD